Adding Firewall Rules for DRDA Post-check User Replacement

To add Firewall rules for DRDA post-check user replacement for a user and system, press the F6 key from the Work with DRDA Post-check User Replacement screen (STRFW > 14 > 5 ) as seen in Setting Firewall Rules for DRDA Post-check User Replacement.

The Add DRDA Post-check User Replacement screen appears:

​                     ​ Add DRDA Post-check User Replacement​                                                                                                        ​ Type choices, press Enter.                                                    ​                                                                                     ​ Source location . . . . . . . .​ ​           ​ ​ Name                ​                                                                                                ​ Source user . . . . . . . . . .​ ​           ​ ​ Name, generic*, User Group, *ALL ​                                                                                   ​ User for OS/400 Security checks​ ​           ​ ​ Name, F4 for list​                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            ​ F3=Exit   F4=Prompt   F12=Cancel​                                                ​                                                                                                                                                                  ​

Enter values for the following fields:

Source location

The name of the system from which the user is connecting.

Source user

A user name from the remote system. This can be a single name or generic* name or *ALL for all users for whom there are no more specific rules.

User for OS/400 Security checks

The user on the current system whose authority Firewall checks after doing its other checks. For a list of known users, press the F4 key.